0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Foot Protection

Set Descending Direction

   

Items 1 to 12 of 57 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Set Descending Direction

   

Items 1 to 12 of 57 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Safety Footwear

BS EN 345 or EN ISO 20345

High Risk Protection. Steel toecap tested too 200 joule. Class S

  • SBSafety Basic 200 joules protection.
  • S1200 joule steel toecap. Fully enclosed heal. With anti-static, heat properties.
  • S2200 joule steel toecap. Fully enclosed heal. With anti-static, heat properties. Water resistant.
  • S3200 joule steel toecap. Fully enclosed heal. With anti-static, heat properties. Water resistant. Penetration resistant.

Additional Safety Features

Other safety features available in our product range. Appropriate symbols will be displayed in product technical.

  • PPenetration resistant steel midsole.
  • AAnti-static protection.
  • INInsulated, cold protection.
  • WRWater resistance

Safety Footwear & Foot Protection

Safety footwear is an essential part to your personal protective equipment (PPE). You will safety footwear when your work exposes you to hazards such as falling objects, sharp objects, moving machinery, electrical contact, abrasives, and similar circumstances may be at risk of a foot injury.

Safety footwear is intended to protect your feet against a variety of injuries. Impact, compression, and puncture are the most frequent types of foot injury.

When selecting your safety footwear you must make sure you leave plenty of toe room (usually about 12.5mm from the front) and there are allowances for additional socks or special arch supports.

You should make certain to monitor the condition of your footwear and when they are damaged or defective think about repairing or replacing them. If you choose not to replace your foot protection when needed then you are putting your feet at risk of injury.